Skip to content
Back to Use & Care

Removing Rust Spots

Removing Rust Spots

Rust spots are easy to remove.

10 minutes · As needed

A little rust does not mean your Ironclad is ruined. Scrub it away, dry the iron properly, oil it lightly and keep cooking.

What You’ll Need

  • Your Ironclad
  • A scouring pad or fine steel wool
  • Hot water
  • A little dish soap
  • A clean tea towel
  • Ironclad Balm or cooking oil

Method

  1. Scrub the rusty spot with a scouring pad or fine steel wool until the rust is gone.Orange rust spot on the cooking surface of the panScrubbing the rusty pan with a scourer in the sink
  2. Wash the area with hot water and a little dish soap, then rinse it well.Rinsing the pan under the tap
  3. Dry the pan with a clean tea towel. Put it over low heat until the last of the moisture has gone.Drying the pan with a tea towel
  4. While the iron is still warm, rub a very thin coat of Ironclad Balm or cooking oil over the cleaned area.Scooping balm from the tin with a clothApplying balm to the pan on the stovetopRubbing a thin coat of balm into the pan
  5. Wipe off the excess, then get back to cooking.Wiping off the excess balm with a clothChecking the underside of the freshly oiled panRust-free pan back on the stovetop, ready to cook

Good to Know

Rust looks worse than it is. A damp pan left in the cupboard can develop a spot, especially where the seasoning has worn thin.

Scrubbing may take a little seasoning off along with the rust. That is fine. The iron underneath is sound, and the seasoning will build again as you cook.

Make sure the pan is completely dry before you put it away.